220-01S

220-01S

Speed CYPRES 2

Speed CYPRES 2
larger imageMove mouse over the image to magnify
The same safety for jumps with an extreme descent rate of up to 43 m/s (141 ft./s).
Enquire

CYPRES - The same safety for jumps with an extreme descent rate.

You are an experienced canopy pilot, and you are looking for the extra challenge of a sophisticated swooping maneuver? The Speed CYPRES 2 is the perfect choice for you. Regardless if you are in freefall or must cutaway after a canopy collision - the Speed CYPRES 2 provides you with the reliable safety at the time

of extreme descent rates in the critical area between approx 225 and 100 meters (approx 750 - 330 feet).

Check out the CYPRES Trade-In offer here:
web trade-in USD
 

Standard Settings:

Activation speed: approx. >96 mph (43 m/s) (for units which have not been updated after 1.1.2013)
  approx. >102 mph (46 m/s) (for new units after 1.1.2013 or units which have been updated at maintenance / service after 1.1.2013)
Activation altitude: approx. 750 - 330 ft (225 - 100 meter)
Disarming altitude: approx. 330 ft (100 meter)

 

 







Technical Data:

Cable length of control unit: approx. 650 mm
Volume: approx. 139 cm³
Weight: approx. 188 grams
Length, width, height of the processing unit: approx. 85 x 43 x 32 mm
Length, width, height of the control unit: approx. 65 x 18 x 6,5 mm
Length, diameter of the release unit: approx. 43 x 8 mm

Cable length of the release unit (including release unit):

approx. 500 mm
Storage temperature: +71° to -25° Celsius
Storage pressure: 200 to 1070 hPa ( 5.906 to 31.597 In.Hg)
Working temperature: +63° to -20° Celsius *
Maximum allowable humidity: up to 99,9 % rel. humidity
Waterproof: up to 24 hours down to a depth of 5 feet (1.5 meters)
Altitude adjustment limits: ±3000 feet or ±1000 m
Operating range below / above sea level: -1500 feet to +26,000 feet (-500 m to +8000 m)
Functioning period: 14 hours from switch-on
Power supply: lifetime warranty**
Maintenance: For units with DOM 12/15 and earlier the maintenance is mandatory to be performed 4 and 8 years after the original DOM.
For units made in 2016 the maintenance is recommended to be performed 4 and 8 years after original DOM.
For units with DOM 01/17 and later the maintenance is recommended to be performed 5 and 10 years after the original DOM.***
Warranty Period: see Airtec warranty policy
Service Life: DOM prior 01.01.2017: 12.5 years from date of manufacture
DOM later 01.01.2017: 15.5 years from date of manufacture

 

* These temperature limits do not mean the outside (ambient) temperatures but rather temperatures inside the processing unit. Therefore, these limits won‘t have any meaning until the processing unit itself has reached the temperatures in question. In actual fact, these limits will rarely be reached due to the mandatory location of the CYPRES in the reserve container, and the insulating properties of the processing unit pouch and parachute canopies.

** If required maintenance has been performed.

*** Anticipated, according to the present knowledge base.

 

You can download the updated CYPRES2 Users Guide here

You might also be interested in ...